Civil/Commercial/Intelligent Sensors
TOP
                                
                            LE-A Series Laser Distance Sensor LE-A100N/P/MN/MP
Benefit conundrum  | Dual output type  | Dual output type  | Switch output type  | Dual output type  | Switch output type  | Dual output type  | Switch output type  | Dual output type  | |
Model  | NPN output  | LE-A030N  | LE-A050N  | LE-A100N  | LE-A100MN  | LE-A200N  | LE-A200MN  | LE-A400N  | LE-A400MN  | 
Output PNP  | LE-A030P  | LE-A050P  | LE-A100P  | LE-A100MP  | LE-A200P  | LE-A200MP  | LE-A400P  | LE-A400MP  | |
Measuring center distance  | 30mm  | 50mm  | 100mm  | 200mm  | 400mm  | ||||
Measuring range  | ±5mm  | ±15mm  | ±35mm  | ±80mm  | ±200mm  | ||||
Repeatability  | 10um  | 30um  | 100um  | 200um  | 400um (detection distance 200mm~400mm) 800um (detection distance 400mm~600mm)  | ||||
Linearity  | ±0.1%F.S.  | ±0.2%F.S.  | ±0.3%F.S.  | ±0.2%F.S.  | |||||
Temperature characteristic  | 0 03%F.S./℃  | ||||||||
Light source  | Maximum output of red semiconductor laser class 2: mW, luminous beam wavelcngth: 655nm  | ||||||||
Beam diameter  | About Φ 50um  | About Φ 70 um  | About Φ 150 um  | About Φ 300 um  | About Φ 500 um  | ||||
Power supply voltagce  | 12V-24V DC±10%% pulsation P-P10%  | ||||||||
Power consumption  | 40mA or less (when the power supply voltage is 24VDC), 60mA or less (when the power supply voltagc is 12DC)  | ||||||||
Control output  | <NPN output type> NPN open collector transistor ·Maximum sink current: 50mA ·Applied voltage: below 30VDC (Between control output and 0v) ·Residual voltage: 1.5V or less, under current 50mA) ·Leakage current: 0.1mA or less  | <PNP output type> PNP open collector transistor ·Maximum source current: 50mA ·Applied voltage: below 30VDQ (Control output-between ten V) Residual voltage: 1.5 or less (Under 50mA outflow current) Lcakage current: 0.1mA or less  | |||||||
Output operation  | ON when receiving light / ON when not receiving light, switchable  | ||||||||
Short circuit protection  | Equipped (automatic recovery type)  | ||||||||
Analog  | Voltage analog output (in case of alarm:+5.2V)  | Output range: 0~5V Output impedance: 100Ω  | X  | Output range: 0~5V Output impedance:  | X  | Output rangc: 0~5V Output impedance: 100Ω  | X  | Output range: 0~5V Output impedance:  | |
Current analog output (0mA in case of alarm)  | Output range: 4-20mA Load impedance: 300Ω or less  | X  | Output range: 4-20mA Load impedance: 300Ω  | X  | Output range: 4-20mA Load impedance: 300Ω  | X  | Output range: 4-20mA Load impedance: 300Ω  | ||
Response time  | 1.5ms/5ms/10ms switchable  | ||||||||
Extcrnal input  | NPN non-contact input; Effective: 0V~+12VDC; Input impedance: about 10kΩ  | ||||||||
Protective structure  | IP67(IEC)  | ||||||||
Degree of pollution  | 2  | ||||||||
Ambient temperature  | -10°C~+40°C (be careful not to condense or freeze), during storage:-20°C~+60°  | ||||||||
Operating ambicnt humidity  | 35%-85%RH,when stored: 35%~85%RH  | ||||||||
Ambicnt humidity illumination  | Incandescent lamp: less than 3,000lx of light-recciving surface illumination  | ||||||||
Operating altitude  | Below 2000m  | ||||||||
Electric cable  | With 0.15mm2 5-core compositc cablc 2m  | ||||||||
Texture of wood  | Body shell: aluminum casting, front cover: acrylic  | ||||||||
Weight  | About 35g(excluding cable), about 85g (including cable)  | ||||||||
Applicable specifications  | Comply with EMC directives  | ||||||||
Product dimension drawing






