S-3 Series Gray Scale Sensor-S-3L100/300(N/P/NP)_Shenzhen Xaori Technology Co., Ltd.

Product

Color / Mark Sensors Products

S-3 Series Gray Scale Sensor-S-3L100/300(N/P/NP)

S-3L100/300(N/P/NP), S-3L60S(N/P/NP), S-3L100/300L(N/P/NP)

Characteristics:

1. The key setting is simple and convenient.

2. Adopt high-power laser light source.

3. Any two different colors can be recognized remotely.

4. Excellent two-point setting function is suitable for detecting two very close colors.

5. Metal shell, durable.

Installation dimensions:

Product Detail

S-3 type selection reference table:

type	S-3
Classification model	S-3L100N S-3L100P S-3L100NP	S-3L300N S-3L300P S-3L300NP	S-3L60SN S-3L60SP S-3L60SNP	S-3L100LN S-3L100LP S-3L100LNP	S-3L300LN S-3L300LP S-3L300LNP
Detection distance	30mm- 100mm	60mm- 300mm	20-60mm	30-100mm	60-300mm
Output mode	NPN output Output PNP N+P output	NPN output Output PNP N+P output	NPN output Output PNP N+P output	NPN output Output PNP N+P output	NPN output Output PNP N+P output
light source	laser
Circular spot	2mm	2.5mm	0.1mm
Line spot				0.5mm*15mm	1mm*40mm
Detection function
Color comparison	Any two different colors include two colors that are very close.
Small object	Detect 1mm minimum object		Test the minimum 0.1mm object	Test the minimum 0.5mm object.
Opaque or translucent objects	Opaque marks on transparent substrates can be detected.
Transparent object	Two kinds of transparent objects with reflectivity of not less than 10% can be identified.
Gloss detection	Transparent objects or glossy objects with fixed background surfaces can be identified.
Objects with different surface conditions	It can detect objects with different surface conditions.
characteristic	Key setting, red laser, gray scale detection
app; application	Ultralong- distance gray scale sensor, which can identify the gray scale stably at a position not less than 100mm.

S-3 specification parameters:

type		Laser color scale color scale		Small spot laser color scale	Laser color scale color scale
model	NPN	S-3L100N	S-3L300N	S-3L60SN	S-3L100LN	S-3L300LN
	PNP	S-3L100P	S-3L300P	S-3L60SP	S-3L100LP	S-3L300LP
	NPN+PNP	S-3L100NP	S-3L300NP	S-3L60SNP	S-3L100LNP	S-3L300LNP
Detection distance		100mm	300mm	60mm	100mm	300mm
Detectable object		Objects of any two different colors
Reaction time		0.5ms max
light source		Red laser
Spot size		2mm		0.1mm	0.5mm*10mm	1mm*40mm
Sensitivity adjustment		Set key
operator schema		LIGHT-ON/DARK-ON (button automatic adjustment, long press for 10 seconds and automatic conversion)
Indicator light		And power supply: red LED, stable operation: green LED
Control output		Or NPN PNP: 100mA(40V) max, residual voltage: 1V max
protective circuit		Reverse current protection, overcurrent protection, overvoltage protection
Power Supply		12 to 24 VDC 10%
Consumption current		Maximum 25mA
the protection grades		IP-66
Ambient luminosity		Incandescent lamp: 5000lux max, daylight: 20000lux max
ambient temperature		"No freezing at -20 to +55℃"
relative humidity		35 to 85%, no condensation
shell		metal shell
weight		70g (including 2M connector cable)

Wiring mode:

Brown line-10 ~ 24vdc

Blue line-0vdc

Black line ----NPN output

White line ----PNP output

Wiring Drawings

Setting method:

1. Aim the sensor light spot at the measured object according to the detection distance of this specification, press the button for 3 seconds, then the indicator light flashes quickly and then goes out after releasing, then aim the light spot at the control object, press the button quickly, and the indicator light will be restored, then the setting has been successful, and two objects with different colors can be randomly compared.

2. Normally open and normally closed switch: hold the button for 10~15 seconds and then release it, the indicator light flashes quickly, and the mode switch is successful.

Use tips and suggestions:

1. Please do not direct strong light into the receiving and emitting mirror of the sensor.

2. During use, if the receiving and emitting mirror surface of the sensor is condensed or contaminated with oil or dust, please wipe the mirror surface with clean, dry and soft cloth, which can restore normal work.

3. If the sensor works in a working environment where oil stains or dust spread, please keep the mirror of the sensor clean. 4. If there are frequent large-scale light changes in the use environment, or there are many highly reflective items, or people or materials will pass through the opposite side of the sensor, it is recommended to set a fixed light shield on the opposite side of the sensor to ensure the reliability.

Product assurance

1. Shelf life: From the date of shipment of this product, the shelf life is one year. If the product fails due to quality problems, the product will be exchanged for free within one year.

2. Non-warranty scope: the product performance and specifications are defined in the manual, and only the specifications and performance of this manual are used for warranty. Our company can provide technical support and suggestions for improvement for customers' improper use or mismatch of specifications and models, but it does not promise unconditional warranty.

Products

Send your inquiry

Color / Mark Sensors Products

S-3 Series Gray Scale Sensor-S-3L100/300(N/P/NP)

Product Detail

link

contact info

newslatter

CAREAR