Product Detail
S1 selection reference table:
type | S-1 |
|
|
Classification model | S-1B10N S-1B10P S-1B10NP | S-1G10N S-1G10P S-1G10NP | S-1R10N S-1R10P S-1R10NP |
Detection distance | 10mm | 10mm | 10mm |
Output mode | NPN PNP N+P | NPN PNP N+P | NPN PNP N+P |
light source | Blue light LED | Green LED | Red light LED |
Circular spot | 2mm | 2.5mm | 2.5mm |
Line spot |
|
Detection function |
Color comparison | Comparison of two colors with large chromatic aberration |
Small object | Detect 1mm minimum object |
Opaque or translucent objects | Opaque marks on partially transparent substrates can be detected. |
Transparent object |
|
Gloss detection |
|
Objects with large differences in shape |
|
characteristic | Small-size color scale sensor, the detection distance is 10mm, and the smallest object that can be detected is 1mm. |
app; application | Suitable for detecting colors with large chromatic aberration. |
S1 specification parameters:
type | Simple color scale type of single light source |
model | NPN | S-1B10N | S-1G10N | S-1R10N |
PNP | S-1B10P | S-1G10P | S-1R10P |
NPN+PNP | S-1B10NP | S-1G10NP | S-1R10NP |
Detection distance | 10mm | 10mm | 10mm |
Detectable object | See the color table. |
Reaction time | 0.5ms max |
light source | Blue LED | Green LED | Red LED |
Spot size | 2mm | 2.5mm | 2.5mm |
Sensitivity adjustment | Set key |
operator schema | LIGHT-ON/DARK-ON (button automatic adjustment, long press for 10 seconds and automatic conversion) |
Indicator light | And power supply: red LED, stable operation: green LED |
Control output | Or NPN PNP: 100mA(40V) max, residual voltage: 1V max. |
protective circuit | Reverse current protection, overcurrent protection, overvoltage protection |
Power Supply | 12 to 24 VDC 10% |
Consumption current | Max 20mA |
the protection grades | IP-66 |
Ambient | Incandescent lamp: 5000lux max, daylight: 20000lux max |
luminosity |
|
ambient temperature | "No freezing at -20 to +55℃" |
relative humidity | 35 to 85%, no condensation |
shell | metal shell |
weight | 70g (including 2M connector cable) |
Wiring mode:
Brown line-10 ~ 24vdc
Blue line-0vdc
Black line ----NPN output
White line ----PNP output
Wiring Drawings
Setting method:
1. According to the detection distance of this specification, aim the sensor light spot at the measured object with strong reflection, press the button for 3 seconds, and the indicator light flashes quickly after releasing, so that the setting is successful, and two different colors can be compared.
2. Normally open and normally closed switch: hold the button for 10~15 seconds and then release it, the indicator light flashes quickly, and the mode switch is successful.
Use tips and suggestions:
1. Please do not direct strong light into the receiving and emitting mirror of the sensor.
2. During use, if the receiving and emitting mirror surface of the sensor is condensed or contaminated with oil or dust, please wipe the mirror surface with clean, dry and soft cloth, which can restore normal work.
3. If the sensor works in a working environment where oil stains or dust spread, please keep the mirror of the sensor clean.
4. If there are frequent large-scale light changes in the use environment, or there are many highly reflective items, or people or materials will pass through the opposite side of the sensor, it is recommended to set a fixed light shield on the opposite side of the sensor to ensure the reliability.
Product assurance
1. Shelf life: From the date of shipment of this product, the shelf life is one year. If the product fails due to quality problems, the product will be exchanged for free within one year.
2. Non-warranty scope: the product performance and specifications are defined in the manual, and only the specifications and performance of this manual are used for warranty. Our company can provide technical support and suggestions for improvement for customers' improper use or mismatch of specifications and models, but it does not promise unconditional warranty.
+86-0755-29898410 +86-0755-29898460 
ron@xaori.net 
