The photoelectric protection device of the punch press is widely used in the manufacturing field. The punch press must apply power to the worktable on which the workpiece is placed, and the operator must place the workpiece and adjust the position of the workpiece. There is no protective device for the punch press. For the operator, it is easy to be sheared by the high-speed descending punch, causing personal safety to be injured.

-Ensure the safe operation of the equipment and safe production, and protect the personal safety of the operator. The punching machine needs to be equipped with safety protection devices. However, general safety protection devices, such as stop switches, are controlled by human observation - such protection devices are often difficult to achieve the desired effect.

-If you want to eliminate the high-speed inertia of the punch really quickly - it is an ideal choice to install an infrared photoelectric protection device for the punch, also known as a safety grating or a safety light curtain.

- The light transmitter and receiver of the photoelectric protection device are detected by the controller and output the detection result information - When other objects or the operator's body mistakenly enter the working area of the punch press - The light formed between the transmitter and the receiver The screen will detect the abnormality - and process the on-off signal of the light curtain through the internal circuit - connect it to the PLC or the alarm circuit of the alarm through the transmission line - realize the equipment stop or issue a safety alarm, which can effectively avoid the occurrence of safety accidents.

-At present, in terms of performance and stability of photoelectric protection devices on the market, Anxie is relatively trustworthy and recommended. -Infrared photoelectric protection device of punch press is related to the safety of industrial production and personal safety. It should be carefully selected and purchased.