Civil/Commercial/Intelligent Sensors
Time:2022-10-28 Views:
1, automatic measurement of low speed driving (1-7km/h) car profile size (including the height of the container rail), a car as long as the time is ≈5-25 seconds.
2. The computer screen dynamically displays the 3D profile and size data of the vehicle. Data processing can be carried out according to the national standard GB1589-2004 "Road vehicle profile size, axle load and mass limits", and the influence of position indicator mirror and other factors can be easily filtered out.
3, basically meet the national standard GB/T3730.3-92 "Automobile and trailer terms and definitions of vehicle size", the Ministry of Public Security "Motor Vehicle Registration Work Specifications" (public transport [2004]115 issued) in the vehicle classification of vehicle size measurement requirements.
4, the measurement accuracy is ≤±20mm, "[can meet the State Economic and Trade Commission document (National economic and trade industry [2002] No. 768] [on further strengthening the vehicle announcement management and registration of relevant matters notice]" in the third article (8) item 1: vehicle product size tolerance allowed range of ±1% requirements.
5. After the detection of the vehicle's profile size (including the height of the container bar), [it can be compared with the original profile size data of the vehicle or automatically compared and determined with the original profile size data of the vehicle Administration database] is convenient for the supervision and management of the vehicle.
6, from the collection of sensor input information into the computer, the vehicle length, width and height, column board depth and suspension data after data processing, dynamic on a computer screen display, storage, printing, self-checking software computer contains sensor module, control module, sampling signal sampling image filtering module, image correction module, 3 d image simulation module, Database storage module Data display module.
7. The vehicle outer profile size detection device can be installed in the external inspection and detection workshop of the detection line. [The installation position can be adjusted from 16-22 meters between the stations according to the field conditions], and the flatness of the detection channel is less than 0.1%.