Focus on safety protection device specializing in the production of safety curtain, safety grating, measuring grating, detection grating, punch protector. Products through ISO9001, CE, FCC, SONCAP, RoHS and other international quality certification. We are not only the production and sales of products, but also the industry knowledge, safety protection device technical knowledge fast transfer of safety grating punch safety protection device classification is mainly divided into six categories.

I. -- Photoelectric protection device: This photoelectric protection device forms a light curtain protection barrier by emitting infrared ray. When the barrier is blocked, it will immediately control the mechanical equipment to stop working and effectively avoid safety accidents. Is beneficial to the company's operators and the society this is the most effective cut the most widely used industrial safety protection equipment!

Two.- protective cover and protective fence: with the protective cover and fence to protect the danger zone, the operator's body can not enter the danger zone so as to avoid the occurrence of accidents. This method and the photoelectric protection device principle is very similar, so the photoelectric protection device is formed a invisible to the production operation of the latest products without interference, in order to production safety we should give priority to choose the photoelectric protection device of the most safe and reliable safety protection equipment!

Iii.-- Safety button: In order to avoid hurting the operator's hands, the operator must press the safety button slider 100 ~ 200mm before the press slider reaches the bottom dead point, otherwise it will stop automatically. Because an operation action is added to alert and protect the operator.

Four.- two-handed control button (also called two-handed control): the operator must operate with both hands at the same time by pressing two buttons or switches, the punch press slider will run down. If any of the buttons are released, the slider will immediately stop running, so as to ensure that the operator's hands are not in the danger zone when the punch press is running down. Finally, it can be subdivided into button type and handle type because the principle is the same and I won't go into details here.

V. -- Joint device of handle and pedal: when the press begins to work, only press the handle with the hand first, and the safety protection of the safety grating punch makes the start lever door brake tip be pulled out, then the foot pedal can be pressed down, so that the starting device can be combined to make the press work. In this way, the operator's hand will naturally leave the danger zone before the slide of the press falls, so as to avoid the injury accident caused by the foot misoperation when the hand is in the danger zone.