The machine can be protected by light curtains of different safety levels. For large machines such as punching machines and shearing machines, safety light curtains with safety level four can be used for safety protection. , In terms of anti-interference, dust-proof and waterproof performance, it has higher performance than the second-level safety grating, and the durability is relatively strong. Compared with the safety light curtain of secondary protection, the safety factor is not so high, so what kind of equipment is suitable for installing the secondary safety light curtain?

Light curtain installation manufacturers, the safety level of the safety light curtain affects the use of the equipment, so the equipment must determine the safety level of the safety light curtain before selecting the safety light curtain. Vibration of small equipment or regional safety protection, compared with safety gratings with safety level four, most of the second-class gratings are economical, of course, the stability is not as good as the fourth-level.

Light curtain installation manufacturer

1. Light curtain installation manufacturers - installation requirements for safety light curtains:

When using safety gratings, safety light curtains, and photoelectric protectors, there are certain requirements for installation. It is not allowed that people can bypass the safety light curtains and enter the dangerous area, and it is not allowed to have reflected light near the safety gratings. , to avoid the situation that the receiver cannot output the safety switch signal after receiving the reflected light.

2. Light curtain installation manufacturers-environmental requirements for safety light curtains:

The use of safety light curtains and photoelectric protectors also has certain requirements for the environment. If there is too much dust in the environment or the organic oil on the equipment often flows to the lens of the grating light curtain, it will affect the emission of light and reduce the distance of infrared reception, thus affecting the The use of safety gratings, therefore, must be kept clean on the transmitting and receiving lenses of the safety light curtain to ensure safety.