1. Size determination: position identification of tiny parts; monitoring of the presence or absence of parts on conveyor belts; detection of material overlap and coverage; control of robot position (tool center position); device status detection; device position detection (through small holes); Liquid level monitoring; thickness measurement; vibration analysis; crash test measurement; automobile related tests, etc.

2. Thickness measurement of metal flakes and thin plates: Laser sensors measure the thickness of metal flakes (thin plates). Thickness change detection can help find wrinkles, small holes or overlaps to avoid machine failure.

3. Measurement of cylinder barrel, simultaneous measurement: angle, length, inner and outer diameter eccentricity, taper, concentricity and surface profile.

5. Inspection of uniformity: put several laser sensors in a row in the inclination direction of the movement of the workpiece to be measured, and directly output the measurement value through one sensor. In addition, a software can be used to calculate the measurement value and read it according to the signal or data. The results.

7. Inspection of filling level on the production line: The laser sensor is integrated into the manufacturing of the filling product. When the filling product passes through the sensor, it can be detected whether it is full. The sensor can accurately identify whether the filling of the filling product is acceptable and the quantity of the product with the extension of the laser beam reflecting surface.