After purchasing the safety grating, we must install the safety grating. Sometimes everyone chooses to install it by himself in order to save costs. Generally, if the safety light curtain installation manufacturer's door-to-door service is installed, a certain cost will be deducted.

So if you install it, what should you pay attention to?

1. General installation:

Fix the signal transmitter and signal receiver of the safety grating on the pole according to the support frame or the top-mounted support frame. For example, IPP's car separation equipment and counting safety light curtains can all be installed in this way.

2. Installation of tubular support frame:

The signal transmitter and signal receiver of the safety grating are fixed by the support frame on the adjustable seamless steel pipe support frame, and then adjusted according to the details.

3. Angle plate installation:

Immediately fix the signal transmitter and signal receiver of the safety grating on the fixed column head with fixed clips or top-mounted support brackets, and then adjust.

The safety light curtain installer can agree to start a risky exercise if it is obvious that it is operating accurately and the calibration button is activated (start interlock). This is the case, so it is important that the overall planning of safety natural barriers and electrical equipment sockets in the middle of components that interrupt the operation of equipment should be carried out with reference to standards. When the equipment is turned off, the safety distance S and the movement rate K are all fundamental factors to ensure the equipment that meets the standard (fitness).

If you encounter any problems in the whole process of installation, or if you do not understand, you can consult the safety light curtain installation manufacturer at any time, and a professional installation engineer will give you specific guidance to prevent unnecessary inconvenience caused by incorrect installation.